Bad MB or CPU?

Exactly your mother board is not right. For getting all about this matter you can get help from mcitp certification, a+ certification and mcp. These are great sources.

Thanks alot for the feedback folks. I think that the MB was dead. Weird thing was that the cpu I was using was also dead. I borrowed a good cpu and process of elimination decided that the MB was toast. Sometimes I get so frustrated helping folks out with thier computers especially when there is no history.

I think a continuous beep is something with the motherboard or power supply. 3 beeps would be video. I wouldn't rule out the memory either- try re-seating the memory in a different socket and see if it helps.

Thanks for the reply. I did read this earlier. The mb has onboard video. Everything that can be disconnected is removed. No beeps just a alarm. I do not know the history of this mb. Maybe it got hot before? Will that give you a alarm sound when you boot it? Also borrowed another cpu last night to test the mb and has the same alarm, no beeps. I do get the standard hp logo on the monitor and it tells me to press f-1 and another f key as a option but nothing happens.

try this link from HP:

http[://]h10025.www1.hp.com/ewfrf/wc/document?docname=bph07107&cc=us&lc=en&dlc=en&product=364757&dlc=en&lang=en#N374

NO ALARM MENTIONED ONLY BEEP CODES BUT FOLLOW STEPS OUTLINED AND NOTICED YOU DID NOT REMOVE VIDEO CARD (1 OF THE STEPS). ANY IDEA WHERE THE "ALARM NOISE IS COMING FROM?"

Hp pavilion a300n. Came to me without cpu or memory. It originally had a 2.6 celeron with 256 pc2100 ddr memory. I installed a used cpu and memory stick I purchased from a recycle place. When I power up the computer I get a alarm. Not a beep code, just sounds like a alarm. I tried various other ddr that I have and same thing. Disconnected all other hardware, cd/rw, hd, floppy, usb and still same alarm. I had something like this years ago and the mb and cpu both were bad, but it had a continueous beep, not in this case just a alarm. I do get a message on the monitor to press f-1 to enter bios and nothing happens. I think that the mb is bad because the guy who gave it to me did not have a cpu in the first place.